Racks

So, you have disc brakes, and only the best is good enough for you. Now, you can mount a Tubus carrier on your bike. Their Disco is designed to be combined with disc brakes. Instead of using added accessories, the Disco simply fits onto your frame. The carrier is easy to mount using the included quick release, or it can also be mounted on eyelets of the frame. Simply load up your bike and go. - Includes QR Skewer

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

Traveling light? Go with Sunlite's Gold Tec Lite Rack. Made from lightweight tubular aluminum, the Gold Tec Lite is durable enough for daily commutes, tough enough for cross-country trips and doesn't weigh you down. The top deck has a capacity of up to 45 pounds and side struts support fully loaded panniers. Plus, it fits both road and mountain bikes.

Sunlite's Welded Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, fits most bikes, and has a capacity of up to 40 pounds.

Add some cargo-hauling capacity to your bike with Sunlite's QR Beam Rack. It doesn't matter if you are commuting, touring or running errands, this rack holds up to 25 pounds of gear and simply attaches to your post via a quick-release bracket. It also sports side supports for panniers. It fit posts from 25 to 32mm in diameter and is made from lightweight tubular aluminum.

- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability

This tubular alloy front rack with espresso stained wood plank cargo deck is perfect for getting take-out or a 6-pack. Adjustable struts for use with 26-inch through 29-inch wheel sizes. The 15 x 13.25-inch deck supports cargo up to 11 lbs.

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Divide Fat fits up to 26×5" or 27.5×4.6" tires. - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 5.1" x 12" (130 mm x 306 mm) - The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide Fat come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55 lbs when eyelet is mounted. For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black - Made in Taiwan - Stainless Steel mounting hardware - Lifetime warranty!

The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets

Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.

You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case. - Strong steel tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 1360 g (3 lbs) - Rated to 35 kgs (77 lbs)

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

Minoura's KCL-2R Rear Carrier is made from welded steel tubing and mounts to the rear of the bicycles. It has an extra large surface area. - Fits 26 to 700c wheels - 11.4 x 16.9 - Max load of 40 lbs. - Durable black powder coat finish - Made of strong steel tubing

When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm

The Tubus Fly is made of two stainless-steel tubes, making it the purist in the lightweight class. This 369-gram masterpiece carries 18 kilograms of luggage, making this model one of the most efficient racks available. With the Fly, optical pleasure and high function work in perfect harmony.

Rack 'em! Designed to complement the clean lines of the Townie collection, the Townie rear rack adds utility while still looking great. - Original equipment replacement rear racks for Electra Townie Commute bikes - Color-matched for direct compatibility - Compatible with the Bontrager Interchange system - Max load rating is 55lbs (25kg) - Size: 700c - Material: Aluminum

The Tara is the most durable, most versatile lowrider rack Tubus makes. It has been Tubus' best selling front carrier for more than 18 years, and Tubus has been improving it along the way. It's incredible strength comes largely from its massive 14mm chromoly main tube and simple design. When used in combination with the Cargo, Tara is the perfect match for long-distance biking. - Separate eyelets for mudguard mounting are also included - For the fat tire applications, see the Tubus Tara Big Apple - Weight: 500 grams/17.6 ounces incl. hardware - Capacity: 15kg/33 pounds - Wheel Size: 26-inch/700c *Not suitable for mounting on suspension or carbon forks without eyelets. Be sure your fork is approved by the manufacturer, or by the bicycle manufacturer for the installation of a rack.

Genuine replacement parts. A MIK-compatible rack that is easy to mount. Details: - MIK: Mounting Is Key - MIK mounting system provides security and integration - Mounting hardware not included

All-alloy bike rack securely mounts to bike to hold up to 40 lb. Features - Secure: Triangulated design holds cargo - Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible - Construction: Lightweight aluminum with stainless steel hardware - Weight: 1.53 lbs / 694 grams - Max Weight: 40 lb / 18 kg

Disc brake compatible leg for Megarack

- Includes mounting kit, extra tube for bags, spring clamp, fastening option for light (80mm) - MIK profiles, comp. with (MIK) accessories - Max. 30kg, 10mm

Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers. - Material: 25CrMo4 - Weight: 740 g | 26.1 oz (28'') - Loading Capacity: 26 kg (tested with 40 kg | 88 lbs) - Diameter: 10 mm | 0.4 in

Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames. - Material: 25CrMo4 - Size: 26'' | 28' - Weight: 800g | 28.2 oz (26" | 28") - Loading Capacity: 26 kg | 57.3 lbs - Diameter: 10mm | 0.4 in

The sturdy Lowrider by Tubus – now also in stainless steel! Highly durable, resistant to rust and can be positioned flexibly. An indestructible, uncomplicated travel companion in an elegant style! - Stainless steel version - Elegant style thanks to polished surface - Indestructible - Matches the appearance of the bike beautifully - Approved for 18 kg | 39.7 lbs - With lamp holder - Size: 26"/28" - Weight: 500g/17.6-ounce - Diameter: 14/10mm | 0.6/0.4-ounce

TARA has no frills in its form, is uncomplicated and variable in its assembly – now even lighter in a titanium version.

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed for use with our EXP Series Side-Load or Top-Load Dry Bags, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly, which is essential to any well-balanced bikepacking setup. - Includes Anything Cradle and two 30" Salsa EXP Series Rubber Straps - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)