Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

MRP SXg Alloy
$169.95
With the SXg, MRP delivers a guide without compromise and with no equal. No longer does the desire for protection and both upper and lower retention have to come at the expense of weight, efficiency, or the addition of moving parts - have your cake and eat it too. With the SXg covering all those bases, it’s the first guide in history that’s equally at home on anything from aggressive, short-travel bikes to Armageddon-ready Rampage rigs, and everywhere in-between. It’s a guide that refuses to be pigeon-holed, blurring the lines between typical industry definitions - a little country and a little rock, as they say. But, in this case, it’s a whole lotta rock. High-security chain retention and bulletproof chainring defense in an innovative, lightweight package with zero efficiency loss make the SXg ideal for a wide range of uses. Whippersnapper™ technology provides lower retention without moving parts or friction. The most advanced chainguide on the market, the SXg is the go-to of the top Rampage stuntmen, World Cup downhill pilots, and superhuman enduro tacticians. - Whippersnapper™ lower guide. - Full-size, nylon HD upper guide with co-molding. - Integrated SX skid provides safeguard to the chainring and glides over rocks and obstacles. - Nylon and TPU co-molding in the Whippersnapper™ provides durable protection from external blows and mutes internal contact with the chain. - Swingset™ hardware. - All installation and adjustment operations are possible with just a single 4mm HEX wrench. - Available in 30-34t and 34-38t sizing. - Alloy guides compatible with chainlines 49mm and wider, carbon 50mm and wider. Boost 148 compatible. - ISCG-05 only. - 149g (34-38t Alloy ISCG-05)
Origin8 Inner Chainring Bolt Set
$10.10
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.
Origin8 Single Chainring Bolts
$9.99 - $24.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
TruVativ BMX To Threaded (BSA) BB Adapter
$20.00
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
Race Face Carbon Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Wheels Manufacturing Inc. PF30 Adapter for 24mm Spindle Cranks
$40.00
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$50.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Sunlite Aluminum Crankarm (Left)
$14.99 - $16.99
• Square taper interface • Only includes left crank
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Alloy Crank Spindle Spacer
$2.99
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Sunlite Aluminum Low Profile Crankarm (Left)
$16.99 - $19.99
• Square taper interface • Only includes left crank • 175mm length
Wheels Manufacturing Inc. Freewheel/BB Spacer
$18.25
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
Race Face Turbine/Next XC/SixC and 2008+ Deus Crank Bolt/Puller
$8.99
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$40.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Race Face Crank Arm Outer Tab Spacers (Set of 4)
$11.99
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Race Face Next SL G4 Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
absoluteBLACK Chainring Bolt Set for 30T Oval Rings
$12.00
absoluteBLACK chainring bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Replacement bolts for 30T 104 BCD oval rings
absoluteBLACK Crank Bolts and Covers for Ultegra 6800 Cranks
$54.99
The absoluteBLACK premium crank bolt and bolt cover sets are designed to cover the small step down between chainring and crank arms. - Designed to fit Shimano Ultegra 6800 cranks - Includes 4 T30 Torx bolts and 4 bolt covers - Not compatible with absoluteBLACK Sub Compact oval chainrings
absoluteBLACK Integrated Headset Top Cap and Bolt
$19.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug
absoluteBLACK Oval Chainguide - ISCG-05 Mount 26-34T
$64.99
The absoluteBLACK Oval Guide is designed specifically for oval chainrings, keeping your chain secure at every single crank position. This small and lightweight chain retention system provides extra insurance that the chain will remain securely located. - Fully compatible with oval chainrings - The adjustable 48-53mm chainline makes it compatible with most bike setups - Includes titanium hardware and spacers - Mounts to ISCG-05 mount - Weight: 22.2g
MRP 1x V3
$74.95
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
FSA BB30 Crank Bolts
$13.99
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
Wheels Manufacturing Inc. BB30 Adapter for Campagnolo Cranks
$50.00
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
SRAM Force Crank Spider
$43.00
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
Wheels Manufacturing Inc. 29mm ID x 1mm Crank Spindle Spacer, Bag of 10
$11.25
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 1.0mm thick - 10 spacers per bag - Machined engineering-grade Delrin
Sunlite Aluminum ISIS Crankarm (Left)
$21.99 - $24.20
• ISIS interface • Only includes left crank • 175mm length
Specialized Power Cranks - Shimano Ultegra Upgrade Kit
$524.99
Whether you're looking to take your training to the next level or you simply want a better way to measure energy expenditure, a power meter is your best bet. And the Power Cranks Ultegra Upgrade Kit are no exception. With our lightweight power sensors on a Shimano Ultegra crankarm, it's the perfect way to enter the power meter game. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the 'real-world' accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Power Cranks are also easy to live with, with class-leading temperature compensation firmware and waterproof enclosures. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Works with ANT+ and Bluetooth® devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Shimano 8000 generation Ultegra left-side power measurement. - Right crankarm and spider NOT included. - Available in 170-175mm crankarm lengths.
Race Face Cinch Direct Mount Lockring
$8.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Race Face CINCH Direct Mount 2x BOOST Spider
$59.99
Race Face Crank Spiders allow a quick swap between chainring options on the Race Face CINCH crank system.
Page 1 of 4 Next page